When faced with a wide selection of different types of sinks present in various types and basic types, and for some homeowners who do an overhaul in the kitchen, they prefer 2 of the several types of sinks available. This basic configuration is made into 2 to make it easier for them to choose the kitchen sink type drop-in and under-mount.
In recent years, the type of drop-in has become a truly dominating choice. When under mounting comes out and they become a more expensive option and have a fairly complicated installation. As time goes by the choice of under-mount becomes a choice at a more reasonable price with the birth of professionals who are comfortable with this type of installation.
Drop-in or Under-mount Sinks are a Great Choice for the Kitchen
Drop-in types are often also referred to as self-rimming or top-mounted. They become the type of sink that you encounter most often for each sink in the kitchen. This sink has a visible surface around it that is on the table. The sink will directly fall on the cut-out table, and the lips will make sure everything stays in place. This type is equipped with a metal clip under the table with silicone beads under the edge of the sink.
Whereas the under-mount type has mounting under the table which is held with task clips and putty to hold the weight of the sink. This sink has a lot of rims, but not so visible because the rim is at the bottom of the table. And the table along the sink piece is completely open. Thus this type requires a solid table material, such as natural stone or quartz.
Space Saving Options
The design of the Under-Mount becomes a choice that saves your space, the table extends to the sink and even longer. Becoming an efficient choice for your room and they provide every square inch of real estate counter. The Under-mount option becomes a very efficient sink choice.
There is a drop-in type that can be an efficient choice for your kitchen too, that is the choice of the entire sink. This type comes with an integrated drainboard with a preparation area up to 8-10 inches outside the sink.
Ease of cleaning
Nothing is more troublesome than cleaning an under-mounted sink with a gap over the sink, which joins the counter. And a clean filled with sleeping silicone never flattens to the surface. And this will make a pile of food.
The drop-in sink option is a good choice that will showcase the sink’s work area and also the ease of accessing it. With this sink, you will get ease in cleaning your sink.
Under-mounted Maintaining a Display Table
Nothing beats an under-mounted choice for cleanliness at your desk. And what makes under-mount more attractive and idolized is because of the cleanliness of the table configuration. Without lips blocking the sink area, you will find it easy to swipe food particles and make them into the sink.
However, some sink drop-in models come with a lower profile rim and make it easy for you to swipe from the counter to your sink, but it’s not as easy as using an under-mount. Stainless steel drop-in comes with the lowest rim, and enameled cast iron has a higher edge that requires you to swipe.
Ease of installation
Drop-in is the winner in the installation, you just put some sleep and set your sink into the hole, center, and use clips under the table for security. This is a very easy DIY job to do.
Under-mount is an option that requires maintenance with the correct installation. The under-mounting must be in place and supported while the clip area is marked. Make a hole must be drilled carefully to the table and attach the clip. With a putty and installed sink, this job is a job for Pro workers.
For consideration of materials and mounting power, the drop-in option is a cheaper option than the under-mount. Like the Cast Iron Kohler drop-in. A 2-hole sink, 4 holes will cost around $ 250, and under-mount at $ 418.
And for the frugal choice installer comes with a drop-in because you can do the installation yourself. However, using pro power in the installation will minimize damage to your desk.
Drop-in Become an option for each type of countertops
Under-mount type can be an option for almost all table materials, but not for lamination. Lamination with MDF will not last with clip tightening during the Westafel installation, nor will it withstand moisture. Covering the holes from the sink with laminate you have to do for protection The core of the MDF, and you have to make sure the sealing between the tub and laminate is perfect to keep the water from your MDF.
And Drop-in is available for every type of table, including laminate.
Options for Resale
Kitchen sinks have a high value for resale rates, and when you use which type of Drop-in or under-mount will increase your sales? Basically, an increase in sales will have an effect when you are slightly robbing your area of additions, floors, rooms and not based on how you choose your sink.
However, there are those who appreciate the appearance of the under-mount which gives the impression and a more luxurious appearance. And it is said as an addition to more value for potential buyers.